Safety checklist — Compactor / roller inspection
Pre-operation inspection of compactor or roller. Based on Québec's Construction Safety Code (CSTC) and CNESST standards.
Exterior walk-around
15 items- ✓
Inspect drum(s) — cracks, dents, padfoot wear if equipped
- ✓
Check rear tires (if combination roller) — pressure, wear
- ✓
Check hydraulic hoses and cylinders — no leaks
- ✓
Check fluid levels: hydraulic, engine, coolant
- ✓
Inspect drum water spray system — nozzles clear
- ✓
Headlights, lights, beacon and backup alarm functional
- ✓
ROPS structure intact — no deformationCritical
- ✓
Fire extinguisher present and charge verified
- ✓
Start — check gauges and warning lights
- ✓
Test service and parking brakes
- ✓
Test steering
- ✓
Test vibration system — start, stop, amplitude adjustment
- ✓
Test travel — forward and reverse
- ✓
Check horn and backup alarm
- ✓
Seat belt functional
Report / Sign-off
5 items- ✓
Record hourmeter reading
- ✓
Log any deficiency in the inspection register
- ✓
Report any major deficiency to supervisorCritical
- ✓
Apply lockout tag if unsafeCritical
- ✓
Sign the inspection form
20 verification items — use this checklist on-site with the app
Use on-site — freePDF reports, history and team management in the app
For information only — this is not legal advice. OK Sécurité is an independent company with no affiliation to the CNESST: we are not mandated, endorsed or certified by it. Completing a checklist here does not by itself establish your compliance — your exact obligations depend on your job site and your prevention program. Where there is any discrepancy, the official text published by Légis Québec or the CNESST prevails.
More checklists — Equipment Inspections
More safety checklists
Why daily inspection — Compactor and roller
Compactors and vibratory rollers operate in active traffic zones with often limited visibility. CSTC 3.10.12 requires a backup alarm on listed machines. A pre-shift walk-around is good practice.
Ground vibration can affect nearby structures and underground utilities. Compaction force must be adapted to proximity of pipes and existing foundations. Operators must check for workers in the manoeuvring zone before each pass.

Scan to access OK Sécurité
Open the app directly on your phone to complete your safety checklists on-site.
ok-securite.com